RRPproxy Homepage
RRPproxy Homepage

CheckNameserver

(Related EPP Command » Host:Check)

The CheckNameserver command is used to check if a name server is available or not. IPv6 name server addresses will be normalized in RRPproxy to match the preferred format defined in RFC-4291. IPv6 addresses can be stated in all valid formats, but will be normalized by our system. Excerpt from RFC-4291 regarding preferred form (https://tools.ietf.org/html/rfc4291): 2.2. Text Representation of Addresses There are three conventional forms for representing IPv6 addresses as text strings: 1. The preferred form is x:x:x:x:x:x:x:x, where the 'x's are one to four hexadecimal digits of the eight 16-bit pieces of the address. Examples: ABCD:EF01:2345:6789:ABCD:EF01:2345:6789 2001:DB8:0:0:8:800:200C:417A

Possible Gateways

The command CheckNameserver is available via the following gateways:

Required Parameters

The following parameters are standard parameters for this command.

Command

command=CheckNameserver
nameserver=(NAMESERVER)

Response

code = (INT)
description = (TEXT)
property[IPADDRESS][n] = (IP)

Attributes

NAMESERVER Optional (e.g. ns1.yourdomain.tld)
IPADDRESS If the nameserver is not available, the given IP address(es) are assigned

Wedomains :)